Magnetically coupled feedthroughs offer exceptional linear/rotary motion for short to medium stroke sample introduction and transfer of light loads. The standard magnetic driver package provides more than 50 ounce-inches (1.059 Nm) of torque and four ...
These electrical power feedthroughs accommodate a higher electrical current due to the size of the copper rod.
XY Stages (also referred to as XY Shifts) provide an essential correction function beneficial in performing sample transfer. XY stages permit up to +/- 1" of movement in both the X and Y axis directions. When used with a probe, the XY stage allows ...
Nor-Cal manufactures its vacuum reducer weld fittings from formed sheet steel. These are used to make standard vacuum reducer fittings or to change the diameter of a customer welded foreline or pump installation manifold.
Vacuum insulators (also known as vacuum breaks and isolators) isolate one component or system from another electrically. PV V&E uses a ceramic insulator with 95% minimum aluminum oxide content, silver brazed to two Kovar sleeves, creating a UHV-compatible ...
2.75" OD-to-1.33" OD CF Conical Reducer Nipple
3.38" OD-to-2.75" OD CF Conical Reducer Nipple
4.5" OD-to-2.75" OD CF Conical Reducer Nipple
4.62" OD-to-2.75" OD CF Conical Reducer Nipple
4.62" OD-to-3.38" OD CF Conical Reducer Nipple
4.62" OD-to-4.5" OD CF Conical Reducer Nipple
6" OD-to-3.38" OD CF Conical Reducer Nipple
6" OD-to-4.5" OD CF Conical Reducer Nipple
6" OD-to-4.62" OD CF Conical Reducer Nipple
ISO-100 to ISO-63 OF Conical Reducer Nipple
ISO-100 to ISO-80 OF Conical Reducer Nipple
ISO-80 to ISO-63 OF Conical Reducer Nipple
NW-25 to NW-16 Conical Reducer Nipple
NW-40 to NW-16 Conical Reducer Nipple
NW-40 to NW-25 Conical Reducer Nipple
